Can’t select certain channel
Noisy stereo reception
No picture, no sound but power light
is on
Sound okay, picture poor
Picture okay, sound poor
No stereo on known stereo station
Can’t get two channels in Pix-in-Pix
No picture while using Pix-in-Pix,
with S-VHS VCR or camcorder
Small picture does not have color.
Remote no longer controls cable
or audio equipment
l
Channel may not be in Channel Memory. Try pressing number buttons.
l
If using VCR, check to make sure
TV/VCR
switch on VCR is in correct
position.
l
To select cable channels 100 thru 128, press number button 1 until l--
appears. Then press other two number buttons.
CABLE/AIR
function must
be in
CABLE
mode to select channels higher than 69.
l
Channel may be locked-out with Parental Control feature.
l
May be a weak station. Change
STEREO/SAP
function to
MONO
setting
instead of
STEREO.
l
Maybe someone changed
CABLE/AIR
function to wrong position.
l
Maybe a vacant channel is tuned.
l
For Channels
and 92, make sure the component connected to those
INPUT
jacks is turned on in order to see the picture.
l
If watching VCR (connected only through antenna input), make sure TV is
tuned to channel 3 or 4-same as
switch on VCR. Also check to
make sure
switch on VCR is in correct position.
l
Check antenna connections.
l
Try adjusting
SHARPNESS
function to improve weak signals.
l
Try another channel.
l
Try adjusting
VOLUME, BASS,
and
TREBLE
controls.
l
If station is sending stereo, try changing
STEREO/SAP
function to
MONO
setting for clearer sound.
l
Try adjusting
SRS
controls to turn
off
or on.
l
Make sure
STEREO/SAP
function is in
STEREO
mode.
l
One channel must come thru
ANT A
or
B
jack and the other channel must
come thru the
INPUT
or 2 jacks.
l
If using the
or
VCR2
button, make sure it is programmed to select the
proper video input channel as described on page 25.
l
If using an S-VHS component, make sure its regular
VIDEO
cable is
connected to
INPUT I VIDEO
jack on the TV.
l
If using a VCR, make sure the
AUDIO
and
VIDEO OUT
jacks on the VCR
are connected to the TV’s
AUDIO
and
VIDEO IN
jacks.
l
If you have an S-VHS VCR (or camcorder) connected, you must also
connect a cable from the VCR’s
VIDEO OUT
jack to the TV’s corresponding
VIDEO
IN jack in addition to the S-VHS cable.
l
The small picture will not have color if the large picture signal does not have
the color burst reference. All color signals and some black-and-white signals
are sent with color burst information. Try changing channels of the large
picture.
l
Try not to press any buttons on the remote while changing its batteries.
Y
OU
may have to reprogram the proper code into the remote.
Содержание P52151WK
Страница 1: ......
Страница 43: ..._ _ _ _ _l __ __ _ _ I _ _ ...
