RCA P52151WK, Руководство пользователя

Страница: 19 / 56

Your TV includes a new feature
called SRS
(Sound Retrieval
System) which brings dimensional
realism to both stereo and mono
broadcasts.
When the ON/OFF function is
set to ON and the STEREO/SAP
function is set to STEREO, your TV
electronically increases the audio
separation of the speakers so you can
perceive a more spacious stereo
sound effect. If a stereo signal is not
present, you can set the
SRS
ON/OFF function to its SYNTH
STEREO setting to synthesize and
process the mono signal.
When the ON/OFF function is
set to ON, you can also change the
next menu item called
SRS WIDTH
between NORMAL or ENHANCE.
When this function is set to
ENHANCE, the perceived audio
separation will be greater. Try both
settings and select the one you prefer
for your room acoustics.
Note: Some material (audio) will be more
affected than others.
SRS uses psychoacoustics to
make you believe you’re hearing
multiple sound sources. Electronic
circuitry selectively processes audio
frequencies to establish spatial
information and directional cues so
you perceive sound coming from all
parts of the room. External speakers
are not required, but the addition of
high quality external speakers will
further optimize the sound
performance of your TV.
urning On SRS
Repeatedly press the MENU button to
select AUDIO MENU,
press
and
then repeatedly press
MENU
again to
select
SRS ON/OFF
function.
Vote: You
can also change the
function between ON and
without going through the menu by
the button on the remote.
Repeatedly press the + button to
setting
between
OFF,
and SYNTH STEREO.
If broadcast you are receiving is
stereo audio, select ON.
STEREO/SAP function must be set
to STEREO before you can hear
SRS sound setting.
If the broadcast you are receiving is
mono audio, select
STEREO.
If you do not want SRS select
O F F .
3. Press MENU button to select next
menu item called SRS WIDTH.
Pr or will change the
setting
between NORMAL and
ENHANCE.
Try both settings and
select the one you prefer.
You will not be able to change
this function the SRS ON/OFF
function is set to ON.
Note:
After turning SRS or synthetic
stereo on, you may find it desirable to
readjust the
VOLUME, BASS, and
TREBLE controls to optimize the sound.
The SRS effect, tonal balance, and
volume level will vary from channel to
channel depending on the production
qualities of the program material.
and are registered trademarks of Hughes
Aircraft Company. a division of GM Hughes Electronics.
17