1.
Repeatedly press
MENU
to select
AUDIO MENU
and then press + or-to display the audio menu.
The
TREBLE
function adjusts the high frequency audio. Press + to
increase treble or press
to decrease treble.
The
BASS
function adjusts
low frequency audio. Press + to increase
bass, or press -to decrease bass.
The BALANCE
function adjusts the left/right balance of sound from the
speakers. When adjusting
the BALANCE
function, sit in your normal
viewing seat while pressing the + and -buttons until the sound seems to
originate from a point halfway between the sneakers. Press + to increase
sound from the right speaker, or press press -to increase sound from the
left speaker.
2. Repeatedly
press
MENU
to
select
function,
then press
+ o r - t o
adjust it.
The
STEREO/SAP
function lets you choose either
MONO
(monaural),
STEREO,
or SAP audio (if available) by pr or
When a station is
broadcasting stereo and
the STEREO/SAP
function is set to
STEREO, the
stereo indicator
(STEREO)
will appear on the screen before
channel
number. Normally you
can
leave
the STEREO/SAP
function set to
STEREO
and your TV will
automatically reproduce either monaural or
stereo audio-whichever is broadcast. Some TV stations that broadcast
stereo also broadcast another sound channel called SAP (Second Audio
Program) which is sometimes used to offer the program in another
language. Your TV lets you know when SAP audio is available by
displaying an asterisk (
on the screen after the stereo indicator like this
(STEREO*).
If you want to listen to the SAP channel when the asterisk
appears, change
the STEREO/SAP
function to its
SAP
setting. The
SAP
setting will only appear in the function when SAP is available. Your TV
will then reproduce
SAP audio until you change channels or
return the
STEREO/SAP
function back to
STEREO.
Note: Some TV stations transmit a “pilot” signal that makes your TV
think it’s receiving stereo, even though
broadcast signal is monaural.
The pilot signal will make
stereo indicator
(STEREO)
appear on the
screen next to the channel number, however, you will not be able to hear
stereo sound. If this happens, check
the TV station to inquire whether
the program being broadcast is in true stereo or monaural audio.
The
SRS: ON/OFF
function lets you add greater
and
dimension
stereo broadcasts. You can turn this function on and off as desired by
pr or to change the setting between ON and
OFF: You
may
prefer to leave this function set to ON. Your TV will then automatically
process the stereo.signals whenever a stereo broadcast is received (Or
whenever a stereo tape is played through a stereo VCR that is connected to
the TV’s audio/video jacks labeled
INPUT).
Details are on page 17.
The
function lets you enhance the perceived audio separation
that occurs when the above SRS function is ON. Pr or changes
4
the setting between
NORMAL
and
ENHANCE.
Details are on
The audio menu will automatically disappear from the
screen
if you do not press + or within a few seconds.
Via remote control, your TV will “remember” which
function you displayed last-even after the menu has
disappeared from the screen. So, if you want to adjust
the same function again, simply press the + or-button
on the remote control. The last function you adjusted
will reappear on the TV screen.
16
The
function lets you turn off the TV’s internal
by
pressing
+ or to change the setting between ON and
probably want to leave the TV’s speakers turned on unless you
amplifier (with its own set of speakers) to
appropriate jacks on the
of the TV as described on page 42.
Содержание P52151WK
Страница 1: ......
Страница 43: ..._ _ _ _ _l __ __ _ _ I _ _ ...