Special Recording onto VCR
(This connection only allows you to record on the VCR whatever is currently being displayed
on the TV screen.)
This is not a common application for recording
with your VCR, but you may find it useful in
certain situations. This connection will let you
record onto the VCR whatever is being displayed
on the TV screen such as a TV program. You’ll
also be able to record signals from another VCR
(or similar device) that is connected to the TV’s
INPUT 1
or 2 jacks.
The TV must remain turned on during recording.
If you change channels on the TV, the channel
change will be recorded on the VCR tape unless
you pause the VCR during recording.
Because your TV is cable-compatible, this
application may be used to record cable-TV
programs from the TV onto a VCR that is not
compatible.
Back of VCR
1
Back of
Audio
AudioNideo Cables*
(such as RCA
You may also want to use this connection to dub or edit VCR
tapes with two or three
By connecting one VCR (or
camcorder) to the
INPUT
I jacks and another VCR (or
camcorder) to the
2
jacks, you’ll be able to selectively
edit and record whatever is playing on the TV screen on to a
third VCR (or camcorder) connected as shown here to the
SELECT OUT
jacks.
If you connect a surveillance system to your monitor, you’ll be
able to record what the camera is displaying on the TV screen
by connecting a VCR (or camcorder) to the
SELECT OUT
jacks
as shown here.
Just remember that you’ll be
to record whatever is being
displayed on the TV screen. To see the signal from a device
connected to the
INPUT
jacks, select channel 9
Select
channel 92 to see the signal from a device connected to the
INPUT 2
jacks.
Notes:
Signals from the
S-VIDEO
connector do not come thru the
SELECT
To record from an S-VHS component, remember
to also connect the regular video
cable to the
VIDEO
I jack
and then
tune to channel 9 1.
Menus, status displays, and special effects like picture-in-picture
and
channel guide will not appear in the recording.
S-VHS (Super VHS) VCR
S-VHS Cable (such as RCA
Back of
Antenna
(such as RCA
(This connection allows you to record
TV programs and play back tapes.)
AudioNideo Cables*
(such as RCA
Incoming
Cable
B a c k of VCR
Shown here is the preferred method of connecting your S-VHS
VCR to your TV. If your cable company requires a decoder
box for premium channels, refer to page 33.
Connect the
S-VIDEO OUT
connector on the back of the VCR
to the
connector on the back of your TV using an
S-VHS cable. Remember to connect the audio cables from the
VCR to the
INPUT 1 LEFT
and
jacks on the back of
the TV. The S-VHS cable carries only video.
Note:
Remember to also connect the video cable for picture-in-picture
viewing
or if you plan to use the
SELECT
for recording.
* Optional accessories are available from most RCA dealers and
electronics supply stores.
When recording from
SELECT OUT
jacks,
tune the TV to channel 9
to see the signal from the S-VHS VCR. When displaying
picture, the TV automatically minimizes any annoying differences in
tint between the small and large picture by electronically coupling the
S-VIDEO
input to the
VIDEO
I input.
Operation:,
l
If the S-VHS VCR is connected as shown above, tune the TV
to channel 90 to view whatever the VCR is playing. The word
S-VIDEO
will appear on the TV when you select Channel 90.
l
You can program your TV to automatically select channel 90
when you press the
or
VCR2
button. Details are on
page 25.
37
Содержание P52151WK
Страница 1: ......
Страница 43: ..._ _ _ _ _l __ __ _ _ I _ _ ...
