6
Chapter 1 Connections and Setup
For models L32FHDF10/L40HDF10
/L40HDF11/L46HDF11
For models L46FHDFE9A
This model comes with the table stand attached. If you want to mount your TV to the wall, remove the
table stand by following the instructions below.
Removing and Installing the stand
Your TV comes with the table stand attached on the back of the TV. If you want to mount the TV to the
wall follow steps1-2. If you do not want to mount your TV to the wall, install the table stand by following
the instructions below.
If you want to mount your TV to the wall, first remove the table stand from the TV’s back cabinet as
shown above:
Step 2
Remove the table stand from the TV
back cabinet by removing the size M8
screw with a screwdriver.
Step 2
Remove the table stand from the TV
cabinet. Use a screwdriver to remove
the four M5 ST-screws.
TV with table stand attached.
TV cabinet with stand cap attached.
Step 1
Place the plastic bag off the TV and
place it on a table or other flat surface.
Place the TV set face down on the TV
bag.
Step 1
Place the plastic bag off the TV and
place it on a table or other flat surface.
Place the TV set face down on the TV
bag.
Step 3
Secure the table stand to the TV
cabinet from the bottom of the TV
by tightening the M8 screw with a
screwdriver.
Step 3
Attach the stand cap to the TV
cabinet.
Mounting Your TV to the Wall
The VESA number is the horizontal and vertical measurement of the mounting holes. For example,
200x100 refers to fact that the mounting measurements are 200mm horizontally and 100mm vertically.
Follow the directions included with the wall mount to mount the TV to the wall.
Caution:
Your wall mount must be able to bear a minimum of five times the TV’s net weight to avoid causing damage.
To mount your TV to the wall, purchase a VESA wall
Model L32FHDF11
Model L46FHDE9A
Models L40FHDF11/L40FHDF11
/L46FHDF11
Purchase a VESA 200 x100, Size M4
screw
Purchase a VESA 600 x400, Size M4
screw
Purchase a VESA 400 x400, Size M6
screw
4
