Chapter 3 - HANDLING AND TRANSPORTATION INFORMATION
RC GROUP S.p.A I_TRP_0909_GB
17
3
HANDLING AND TRANSPORTATION INFORMATION
3.1 TRANSPORTATION
The means of transportation used for the machine, apart from normal
requirements, must be compatible with the loading systems adopted in
the production factory and at the unloading site.
When using road transport means, the body must be open and of the
drop-side type.
IMPORTANT
For any further information, please contact the manufacturer’s
Shipping Department.
3.2 PACKING AND UNPACKING
The machine can be transported with different types of packing,
according to its predetermined destination, transport procedures and
technical/commercial specifications.
WARNING - CAUTION
If the machine must be shipped without a commercial container, it
is necessary to provide special packaging to ensure that it remains
intact.
Unpack the machine on receipt to check whether it is intact and
conforming to the order.
IMPORTANT
In case of any damage or if some parts are missing, contact the
manufacturer’s Sales Department to agree the procedures to be
adopted.
If the machine is not installed on receipt and is stored for a long time,
store it in a protected place, at temperatures ranging between -25°C
and 50°C.
WARNING - CAUTION
If the place where the machine is stored is too hot, the refrigerant’
pressure is likely to rise too much, causing the activation of the
safety valves.
