RBR quartz3 BPR zero, Инструкция по эксплуатации инструмента

Страница: 11 / 20

RBR#0008819revA – 11
1.
2.
3.
6.2 Changing the batteries - RBRquartz BPR|zero
The RBR quartz
3
BPR|zero has a n internal battery holder contains 8xAA batteries (any chemistry, including LTC).
However, this is intended only for purposes of sustaining the instrument during external power interruptions of a few
minutes. While the Paros will continue to run and be measured, the valve will not operate.
6.2.1 Steps:
Remove the battery end cap from the logger. (see: Opening and closing the RBRquartz BPR|zero )
Remove the old cells from the battery end cap.
Install new cells with the negative terminal installed on the side with the spring. The terminals are also
labelled on the boards.
4. Reinstall the battery end cap.