RBR quartz3 BPR zero, Инструкция по эксплуатации инструмента

Страница: 9 / 20

RBR#0008819revA – 9
6 Instrument Hardware
6.1 Opening and closing the RBRquartz BPR|zero
Instruments have both a "sensor end cap" and a "battery end cap". The battery end cap will be the side with the two
underwater connectors (both MCBH and MINK are options, MCBH is shown below). Only the battery end cap needs to be
opened to access the data connector, batteries, desiccant, and waste reservoir. To open the logger battery end cap, the
two M6 screws will need to be removed using a 6mm Allan key (supplied). To do this the instrument can be stood on the
sensor end cap and held vertically, or laid on its side.
Once the screws are removed, the battery end cap can be removed and rested on the side of the housing when standing
vertical.