RBR quartz3 BPR zero, Инструкция по эксплуатации инструмента

Страница: 10 / 20

RBR#0008819revA – 10
To reassemble, line up the battery end alignment pin with its socket and push until the battery end cap is mated fully to
the housing. Remember to keep the O-rings clean and avoid scratching the O-ring mating surfaces. Carefully inspect the
O-rings, as described in the Inspecting the O-rings section , before deploying the logger.
Reinstall the 2 X M6 screws and tighten to max of 10Nm.