18
MagCore® HF48
Select Moving Test in Maintenance menu
Select the items needed to test Press Start to start test The motor
will run continuously until user press Stop
Select DC Motor Operate in Maintenance menu
All consumables are fixed in the system when test is stopped
As it is necessary, this control interface may be used to move up
and down the operating area manually to take out consumables
conveniently
Refer to the area arrangement shown in page 7 for up/down area
Select the area you want to move up or down and press Start to
start up/down It will stop automatically as the motor moves to the
peak point
Maintenance
Please select Item
Back
UV Sterilization
Moving Test
Heater Test
Rejection Tip
Piston Test
O-Ring & Piercing Needles
DC Motor Operate
Update Program Files
Maintenance
Please select Item
Back
UV Sterilization
Moving Test
Heater Test
Rejection Tip
Piston Test
O-Ring & Piercing Needles
DC Motor Operate
Update Program Files
Moving Test
Please select Item
Back
X Asix Moveing Test
Y Asix Moveing Test
M Asix Moveing Test
V Asix Moveing Test
ALL Asix Moveing Test
Stop
Start
DC Mortor Operate
Please select Item
Back
Opretion Area A UP
Opretion Area A DOWN
Opretion Area B DOWN
Shutter Close
Opretion Area B UP
Shutter Open
Start
━ Moving Test
━ DC Motor Operate
Next Step
Next Step
X axis motor running test
Operation Area A UP
Shutter Open
Operation Area B UP
Y axis motor running test
Operation Area A DOWN
Shutter Close
Operation Area B DOWN
M axis motor running test
V axis motor running test
Running tests for all axes in turn
