RBC Bioscience MagCore HF48, Руководство по эксплуатации

Страница: 15 / 24

14
MagCore® HF48
Select Replace O-Rings item and press START key to start
Follow the prompted step Use a sharp blade to cut off old O-ring
Press NEXT after completion
Apply new O-ring
Press Finish to complete after lubricant is coated
Replace O-Rings Clean Piercing Needles
Start
Stop
O-Ring & Piercing Needles
Select item and Press Start to run Back
━ Replace O-Rings
Replace O-Rings Clean Piercing Needles
Start
Stop
O-Ring & Piercing Needles
Select item and Press Start to run Back
Next
Replace O-Rings Step 1
Use a shap blade to cut off old O-ring.
Replace O-Rings Clean Piercing Needles
Start
Stop
O-Ring & Piercing Needles
Select item and Press Start to run Back
Next
Replace O-Rings Step 2
Apply with new one.
Replace O-Rings Clean Piercing Needles
Start
Stop
O-Ring & Piercing Needles
Select item and Press Start to run Back
Finish
Replace O-Rings Step 3
Use supplied lubricating oil to rub a thin layer around O-Rings.
Select Clear Piercing Needles, and press START to start
Please prepare a cotton paper with 70% alcohol added to clean
Replace O-Rings Clean Piercing Needles
Start
Stop
O-Ring & Piercing Needles
Select item and Press Start to run
Back
━ Clean Piercing Needles
Replace O-Rings Clean Piercing Needles
Start
Stop
O-Ring & Piercing Needles
Select item and Press Start to run Back
Finish
Clean Piercing Needles
Piercing Needles are positioned and stopped, use 70% alcohol with cotton paper to clean.
Next Step
Next Step
Next Step
Next Step
Please do NOT use detergent
other than 70% alcohol to
clean.
Piercing needles are very sharp,
please do not hurt your hands!