Raytheon Electronics ST6000 Plus, Руководство пользователя

Страница: 39 / 90

Chapter 3: Advanced Operation
27
Watch alarm
WATCH ALM
The Watch alarm is activated in Watch mode when the timer reaches
4 minutes. It is not available from Standby mode.
If you wish to set the Watch mode, the
WATCH
screen must be
configured as one of the Data Pages for display, as described in section
5.1.
To set and control the Watch alarm:
1. Select Auto, Track or Vane mode.
2. Press the
disp
key until the
WATCH
Data Page is displayed.
• The watch timer starts counting.
• When the timer reaches 3 minutes, the text on the display starts
flashing to indicate the last minute of Watch alarm.
• When the timer reaches 4 mins, the audible Watch alarm
activates.
3. Press auto at any time to silence the alarm and reset the timer to
4 minutes. (Pressing any other key resets the timer and perform the
key’s normal function.)
4. To clear Watch mode, press
disp
to display a different page, or
press
standby
.
Note: You cannot engage Auto mode from Watch mode – pressing
auto only resets the Watch timer.
Man overboard (MOB)
If a man overboard (MOB) message is received from another
instrument on the SeaTalk system, the text
MOB
is shown instead of the
waypoint number for the
XTE, DTW
and
BTW
Data Pages.
If the autopilot is operating in Track mode, the Waypoint Advance
alarm will sound to notify the change in waypoint.
133_3c03.p65 14/06/99, 10:23 27