Raytheon Electronics ST6000 Plus, Руководство пользователя

Страница: 37 / 90

Chapter 3: Advanced Operation
25
Off course
OFFCOURSE
This alarm is activated when the vessel has been off course from the
locked heading by more than the specified angle for more than
20 seconds (see section 2.3, Using Auto mode).
The alarm is cleared if the heading recovers or the course is changed, or
if the operating mode is changed.
Wind shift
WINDSHIFT
This alarm is activated when a change in the apparent wind angle
requires an adjustment of the locked heading by more than 15° (see
section 3.2, Operation in Vane mode).
Large cross track error
LARGE XTE
This alarm is activated when the cross track error exceeds 0.3 nm (see
section 3.1, Operation in Track mode.
The alarm is cleared if the heading recovers or the course is changed, or
if the operating mode is changed.
Drive stopped
DRIVESTOP
This alarm is activated if:
• the rudder reference transducer fails.
• the autopilot is unable to turn the rudder. This occurs if the weather
load on helm is too high, or if the rudder position is past the preset
rudder limits or the rudder end-stops.
Data not received
NO DATA
This alarm is displayed in the following circumstances:
• Compass not connected.
• Track mode is engaged and the autopilot is not receiving SeaTalk
navigation data.
133_3c03.p65 14/06/99, 10:23 25