Raytec Americas:
+1 613 270 9990 • [email protected]
Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
Version 1
www.raytecled.com
1277-D
-0002
Installation Steps
Hook Pendant Installation (Ordered Separately)
Step 1.
Step 2.
Step 5.
Step 6.
Step 3.
Step 4.
This SPX-BKT-AR-HK kit is intended for use with UL Listed AR luminaire as marked on the luminaire nameplate.
This kit contains NSF component Anti-Rotation-Lock
(1004-01-02-201)
Accessory Package Contents
Refer to alternate instructions if using Pendant, Wall, Pole or Yoke Mount
Inspect shipping package and contents to ensure no damage has occurred during
shipping. Discard surface/ceiling mounting bracket provided with AR luminaire.
It is recommended to install Secondary Safety Cable by looping appropriate steel cable
or chain through the outer band of the unit and fastening a closed loop. Secondary
safety hardware must be rated for a minimum of 180lbs. Secondary safety cables
made from stainless steel aircraft cable are available upon request.
Install remaining loop of secondary safety chain or steel cable to suitable mounting
location and fasten securely.
Resume installation instructions provided with luminaire. (STEP 4 in AR Installation
Instructions provided with Luminaire)
Slide anti-rotation lock onto suspension hook assembly and install hook
assembly into ¾ NPT threaded entry. Tighten to hand tight plus 1 to 2 turns.
Slide anti-rotation lock into place and tighten set screw to lock unit in place.
NOTE: To aid in assembly and protection against ingress use of a petrolatum or
soap thickened mineral oil based thread lubricant/sealant is necessary.
Un-used conduit opening must be plugged to maintain the integrity of the
enclosure.
Latch hook onto eye-bolt or other fixed mounting loop. Mounting point must be
rated for a minimum of 180lbs.
SPX-BKT-AR-HK
QTY
PART NAME
1
PENDANT HOOK ASSEMBLY
1
ANTI-ROTATION ASSEMBLY
Step 2
Step 3
SPI-AR
