Raytec Americas:
+1 613 270 9990 • [email protected]
Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
Version 1
www.raytecled.com
1277-D
-0002
SPI-AR
SET SCREW
Installation Steps
Pole Mount Installation (Ordered Separately)
Step 1.
Step 2.
Step 5.
Step 6.
Step 3.
Step 4.
This SPX-BKT-AR-PM kit is intended for use with UL Listed AR luminaire as marked on the luminaire nameplate.
Accessory Package Contents
Refer to alternate instructions if using Conduit, Hook, Wall or Yoke Mount
Inspect shipping package and contents to ensure no damage
has occurred during shipping. Discard surface/ceiling
mounting bracket provided with AR luminaire. Remove 4 x
M6 bolts from supply side of luminaire and disard.
Install the provided plastic 3/4” bushing into side 3/4” NPT entry.
Insert and tension M6 set screw to pole to lock rotation.
Resume installation instructions provided with luminaire.
(STEP 4 in AR Installation Instructions provided with Luminaire)
Install Pole Mount and gasket with adhesive side applied
to mount using included M6 bolts and washers.
Torque to 5 Nm (45 in-lbs)
Thread luminaire assembly onto 1.5” NPT pole
NOTE: To aid in assembly and protection against ingress
use of a petrolatum or soap thickened mineral oil based
thread lubricant/sealant is necessary.
Step 3
Step 5
SPX-BKT-AR-PM
QTY
PART NAME
1
POLE MOUNT
1
POLE MOUNT GASKET
4
M6 X 25mm HEX HEAD CAP SCREW
4
M6 FLAT WASHER
1
M6 X 16mm HEX HEAD CAP SCREW
1
3/4 NPT THREADED SMOOTH BORE BUSHING
