o
Rule
Number:
This
is
the
rule
selected
“1”.
Rule
No.
1
has
the
highest
priority;
rule
No.
2
has
the
second
priority,
and
so
on.
o
Rule
Name:
The
rule
name
can
be
changed
here.
o
Source/Destination
–
Interface/Zone:
There
are
choices
of
ALL,
WAN
,
Public
and
Private
to
be
applied
for
the
traffic
interface.
o
Source/Destination
–
IP
Address/Domain
Name:
Enter
the
source
and
destination
IP
addresses.
Domain
Name
filtering
is
supported
but
Domain
Host
filtering
is
not.
o
Source/Destination
–
Subnet
Mask:
Select
the
source
and
destination
subnet
masks.
o
Source
‐
MAC
Address:
The
MAC
Address
of
the
source
IP
address.
This
is
for
specific
MAC
address
filtering.
o
Service
Protocol:
These
are
defined
protocols
on
the
service
protocols
list
to
be
selected.
o
Schedule:
When
schedule
is
selected,
clients
assigned
with
this
policy
are
applied
the
firewall
rule
only
within
the
time
checked.
There
are
three
options,
Always
,
Recurring
and
One
Time.
Recurring
is
set
with
the
hours
within
a
week.
o
Action
for
Matched
Packets:
There
are
two
options,
Block
and
Pass
.
Block
is
to
prevent
packets
from
passing
and
Pass
is
to
permit
packets
passing.
55
