RayTalk RA-696, Руководство пользователя

Страница: 150 / 152

Setting Up RT ‐ TO696RF with the POS Printer
Serial Settings
To make a POS printer properly functions with RT ‐ TO696RF, set up serial settings in advance in Console on RT ‐ TO696RF’s WMI.
The default values are for RT ‐ TP5x5 devices.
Change the values if you use another POS printer.
Printing On ‐ demand Tickets for Your Customers
Operators have two ways of printing on ‐ demand account tickets for their customers. One is to go onto the WMI of RayTalk Hot
Spot Wi ‐ Fi Access Point or Internet Subscriber Gateway. The other is to use RT ‐ TO696RF by the following two shortcut keys.
(1) ‘Number’ + ENTER or
(2) ‘Number 1’ + asterisk (*) + ‘Number 2’ + ENTER
For example,
‘ 3 ’ + ENTER is to have POS printer print out a billing 3 ticket;
‘4’ + asterisk (*) + ‘2’ + ENTER allows operator to print a single ticket of billing plan 4 with two units of the quota.
That is, the given quota is multiplied by two. Note that the keys can only print out tickets one at a time.
To Batch ‐ create tickets, turn to
Main Menu > Users > Authentication > On ‐ demand User Server Configuration > On ‐ demand Account Batch Creation on RayTalk
Hot Spot devices’s WMI.
Use FUNC + ENTER or wait 5 seconds to clear the wrong number just pressed.
Setting up RT ‐ TO696RF with the RayTalk Hot Spot Wi ‐ Fi Access Point or
Internet Subscriber Gateway
RT ‐ TO696RF offers ‘manual’ and ‘auto’ connection to uplink RayTalk Hot Spot Wi ‐ Fi Access Point or Internet Subscriber
Gateway. The former implies that administrator would have to go on to RT ‐ TO696RF’s WMI, filling in necessary columns that are
supposed to fit what is set up on the controller end. However, the auto connection – called Terminal Auto Setup (TAS) – is
particularly designed for quickly establishing connection without any previous setting.
Manual setup
Connecting RT ‐ TO696RF to uplink RayTalk Hot Spot Wi ‐ Fi Access Point or Internet Subscriber Gateway manually, there are still
two ways to achieve. One is through wired connection, and the other is via wireless connection.
Method 1: Wired Connection
Plug in an Ethernet cable between RT ‐ TO696RF and RayTalk Hot Spot Wi ‐ Fi Access Point or Internet Subscriber Gateway. Fill in
Network Settings and make sure they match what is determined on the controller. The change will take effect after (1) clicking
Save and (2) rebooting the system. After RT ‐ TO696RF and the uplink device has built up a successful connection, the Status
indicator will blink with long illuminated intervals.
147