Raymarine ST7000, Руководство по установке

Страница: 27 / 55

2.2.4 Stern Drive Actuator
The drive unit can be fitted to power assisted stern
drive systems made by Volvo Penta, Mercruiser,
OMC and Yamaha. A different installation kit is
required for each manufacturer
Volvo Penta Installation
(Using D129 Kit, Fig. 26)
The stern drive actuator should be connected to
the centre hole on the tiller arm. On twin engine
installations this is the position used to connect
the engine tie bar to link the two tiller arms.
Installation
•
Push the mounting bracket behind the
steering cable sliding the location pins either
side (top and bottom) of the Volvo power
steering block (Fig. 27).
•
Ensuring that the bracket clamp is correctly
orientated (larger diameter towards engine)
place the bracket clamp between the valve
block and cable clamp nut and attach with the
four hexagonal bolts supplied. Tighten the
four bolts evenly until the bracket is securely
located (Fig. 27).
22