Raymarine ST7000, Руководство по установке

Страница: 47 / 55

5.9 Compass Alignment
If it is necessary to change Compass Alignment
without carrying out the Automatic Deviation
Correction proceed as follows:-
•
Push and hold Standby for 1 second to
select compass adjust mode.
•
Push Display once to bypass Automatic
Deviation Correction
•
Use the course change buttons to adjust the
heading displayed
•
To exit compass adjust and store the new
setting push and hold
Standby for 1 second
•
To exit compass adjust without saving the
new setting push
Standby momentarily
•
To confirm the alignment procedure has been
correctly carried out, switch off power, switch
back on and check displayed heading.
Repeat the alignment procedure if incorrect.
42