Raymarine ST7000, Руководство по установке

Страница: 17 / 55

2. Installation
2.1.1 Course Computer
Mounting Position - Below Deck
The course computer should be positioned in a
dry protected area of the vessel free from high
operating temperatures and excessive vibration. It
can be mounted in any attitude. Care must be
taken to allow at least 150mm (6in) clearance all
round to aid heat dissipation from the power
amplifier in the unit. Do not mount in the engine
room.
Do not position the course computer so that it will:
•
Receive any direct water splash/spray (from
Bilge/Hatch etc).
•
Be liable to physical damage from heavy
items.
Mounting Instructions
•
Remove Terminal box lid (Fig. 4).
•
Unscrew two internal thumb retaining nuts
(Fig. 4).
•
Unplug terminal box and mounting spine.
•
Position terminal box and mounting spine in
correct location, mark off and pilot drill for the
5 self-tapping screws supplied (Fig. 5).
•
Screw terminal box and mounting spine into
place.
•
Plug course computer unit to terminal box.
Retighten thumb retaining screws.
The course computer is now ready for wiring
(see 2.3).
•
Be covered by other
equipment or onboard gear.
•
Be close to major sources of
transmitted energy
(Generators/SSB radios,
Aerial Cables etc).
12