Raymarine ST70 Instrument, Руководство по установке

Страница: 30 / 73

20 ST70+ User Reference Manual
Scrolling.
To scroll to an option or set a value, either:
•
Press the
<
and
>
buttons on the sail boat Pilot Con-
troller keypad, or
• Turn the Rotary Control on the power boat Pilot Con-
troller keypad or the Instrument keypad
OK function
The manner in which you confirm, (i.e. ‘OK’) selections and
edited values depends on which keypad type you are using.
•
On a sailboat Pilot Controller keypad, press and release
the
OK
button.
• On a power boat Pilot Controller keypad or an Instrument
keypad, press and release the center of the Rotary Control.
Select Display
The Select Display button is used in systems with more than one display, to
select the display you want to control or set up. One press highlights the currently
selected display. If you press Select Display again while the currently selected display
is highlighted (i.e. within 6 seconds), this selects the next display in the system.
Repeating this action enables you to select each display in turn.
3.2 Initial setup
Carry out the initial setup procedures in the following sequence:
•
Switch on.
• Selecting language.
• Setting vessel type.
• Setting display types and groups.
• Allocate keypad.
• Set date and time format (only if GPS is fitted).
• Set correct local time (only if GPS is fitted).
• Set required data units.
Switch on
.
At an ST70+ keypad, press the power button
switch on the displays. When an ST70+ system is
first switched on after installation, one display
shows a select
Language menu. This is the active
display.
Other displays show a Select Display icon .
If necessary use the Select Display button on any
ST70+ keypad to select another display as the active display, i.e. so it shows the
select
Language menu.
or
Scrolling
=
OK functions
D1
1
140-1
Language
English (UK)
Press OK to select
87099_1.book Page 20 Thursday, March 12, 2009 10:18 AM