Raymarine SPX-5, Инструкция по установке и настройке

Страница: 21 / 76

Chapter 2: Installing the system 13
Note:
The wheel drive is designed to work with 3 spoke clamps on 4 and 8 spoke wheels. How-
ever, you may want to fit an extra spoke clamp to the fourth spoke, to give a symmetrical look to
the installation. Raymarine dealers can supply an extra spoke clamp (part number A18089).
3. Drill the appropriate spoke clamp holes using the larger of the supplied drill bits
(6.0 mm or 1/4 in):
•
drill from the inside, placing a piece of scrap wood under the cover to produce
a clean exit hole
• you will need to drill 4 new holes so the cover has 6 holes in total (2 for each
spoke clamp)
Note:
The spoke clamps will cover these exit holes, so they will not be visible when the wheel
drive is installed.
4. Align the cover with the wheel drive:
• The two pre-drilled holes (marked with an arrow) must line up with their
matching pair of threaded inserts on the drive ring (also marked with an arrow).
• Make sure that the other spoke clamp holes align with their threaded inserts.
D10633-1
3 or 6 spokes 4 or 8 spokes
Top 2 spoke clamp holes
are pre-drilled
Piece of scrap wood
D10634-1
87074_2.book Page 13 Wednesday, November 21, 2007 3:55 PM