Raymarine RC520, Руководство пользователя

Страница: 113 / 218

Chapter 5: Standard Chart Operations 99
1. Press the ROUTE soft key, followed by MORE , then press ROUTE LIST . The
route list is displayed. The grey selection bar indicates the selected route.
Press the appropriate soft key –
ERASE ROUTE
or
NAME ROUTE
.
2. If you
ERASE
a route you are prompted to confirm.
Press NO to cancel the operation, then ENTER or CLEAR if you wish to
remove the route list.
Press
YES
to erase the route from the list, then
ENTER
or
CLEAR
to remove
the route list.
3. If you NAME a route, use the trackpad to move the cursor right or left to the
character you wish to edit. Then use the top or bottom of the trackpad to
increase or decrease the letter or number.
4. Press
ENTER
to clear the Name List, or
CLEAR
to cancel the name then to
return to the default soft key display, press
ENTER
again.
Editing a Route
Once you have created a route, you can edit it by:
• Inserting a Waypoint into the route
• Adding waypoints at the end of the route
• Removing a Waypoint
• Reversing a Route
• Moving a Waypoint as described in Section 5.3
Any changes you make to the route affect only the current route. The current
route is always held in position 0 in the database, so you need to Save the route
if you want to keep the changes.
Inserting a Waypoint into a Route
You can use the context-sensitive cursor to insert one or more waypoints in the
current route. However, if the route is being followed you cannot insert a
waypoint into the current leg.
➤
To insert a new waypoint in the current route:
1. Move the cursor over the route leg into which you wish to insert a
waypoint. The letters
RTE
and the route leg data box are displayed. The
Route soft keys are displayed.
2. Press ENTER . The cursor changes to a four-way arrow, controlling a new
waypoint. The waypoint is connected to the existing waypoints on either
side with a dashed line.
3. Move the new waypoint to the required position, and press
ENTER
to drop
it and return to normal cursor operation, or CLEAR to abandon the
operation.
ERASE
ROUTE
ROUTE
LIST
NAME
ROUTE
Editing a Route