Raymarine RAY50, Инструкция по установке и эксплуатации

Страница: 77 / 116

9.3 Fog horn
The fog horn function requires an optional loud hailer
to be connected.
The fog horn function can be set to manual or to a
predefined automatic mode
The predefined automatic modes consist of a
sequence of tones which are then repeated.
Fog mode Description Pattern
Underway Vessel underway 1 long tone
Under-
way/Stopped Vessel not underway 2 long tones
Sailing/Fish-
ing sailing vessel or any
vessel fishing but not
trolling 1 long tone and 2
short tones
Restrict/Tow
Restricted in ability to
maneuver or towing
another vessel 1 long tone and 2
short tones
Under tow
This vessel is being
towed 1 long tone and 3
short tones
Pilot vessel This vessel is a pilot
vessel 4 short tones
At anchor Vessel is at anchor 12 consecutive
rings
Aground Vessel is aground 3 short rings, 12
consecutive rings,
3 short rings
In manual mode a continuous tone is sounded for as
long as the
PTT button is pressed.
Note: VHF calls can only be made between fog
horn patterns.
Using the fog horn in manual mode
From the Hail/Fog/Int menu: Menu > Hail/Fog/Int .
1. Select Fog horn .
2. Select Manual mode .
3. Press and hold the PTT button to sound a
continuous fog horn tone.
4. Press the Back button to exit Fog horn mode.
Using automatic fog horn modes
From the Hail/Fog/Int menu: Menu > Hail/Fog/Int .
1. Select Fog horn .
2. Select Automatic mode .
3. Select an automatic pattern.
The selected pattern will play and repeat until
interrupted.
4. Select Stop fog horn to exit the automatic fog
horn mode, or
5. Select Change pattern to select a different fog
horn pattern.
9.4 Intercom — Ray60 and Ray70
The Intercom function is available when a second
station is connected to your radio.
The intercom function allows voice communication
between the second (handset) station and the
primary station. A call can be initiated from either
station.
Using the intercom
From the Hail/Fog/Int menu: Menu > Hail/Fog/Int .
1. Select Intercom .
The other station will ring.
2. Wait for the handset station to acknowledge the
call.
3. Press and hold the PTT button and speak your
message.
Responding to the intercom
1. Press the PTT button and acknowledge the call
and to respond to subsequent voice messages.
Hailer, Fog horn, and Intercom
77