Raymarine RAY50, Инструкция по установке и эксплуатации

Страница: 62 / 116

7.4 Safety calls
Making a safety call
Safety calls should be used when there is an
important navigational warning or meteorological
forecast/broadcast. Safety alerts can also be used
for communications during search and rescue
operations.
From the All ships call menu: Menu > DSC Calls >
All ships call .
1. Select Safety .
2. Select the channel for subsequent
communication.
The call is transmitted. Once the call has been
successfully transmitted ‘
Sent ’ is displayed
onscreen and the channel is changed to the
specified channel.
3. Press the OK button.
4. Press and hold the PTT button and speak the
following message:
SECURITE, SECURITE, SECURITE
ALL STATIONS, ALL STATIONS, ALL
STATIONS
This is <MMSI of your vessel, name of your
vessel repeated 3 times, call sign of your vessel>
Position <Your vessel’s position>
Reason for call <state the reason for the safety
call>
OUT
Receiving a safety call
When a safety call is received:
1. Select
Show info from the options to review
relevant call details.
2. Select Accept at any time to accept the call.
If auto channel change is turned on then the
channel will automatically change after 10
seconds.
The radio is re-tuned to the specified channel.
3. Listen for the safety call message.
7.5 Individual (routine) calls
Individual calls can be made to contacts saved
in your phonebook or to any station by manually
entering an MMSI number.
Note: When calling a coast station there is no
need to select a channel for communication.
If a call cannot be accepted then a reason code is
displayed.
No Reason No reason given
Congestion Congestion at maritime switching centre
Busy Station Busy
Queue
Queue indication
Barred Station barred
No operator No operator available
Unavailable Operator temporarily unavailable
Disable
Equipment disabled
Unable Ch Unable to use proposed channel
Unable mode Unable to use proposed mode
Making a routine DSC call
From the Individual Call menu: Menu > DSC Calls
> Individual Call .
1. Select Phonebook to make a routine call to a
contact saved in your Phonebook, or
2. Select Recent Calls to make a routine call to a
contact that you have called recently, or
3. Select Enter MMSI to manually enter the MMSI
number of the station you want to contact.
4. Select a contact or enter an MMSI manually and
press the OK button.
5. Select the Channel you want to transmit the call
on.
If the MMSI is a CSR then the radio will
automatically tune to the correct Channel. The
radio will wait for an acknowledgement to be
received.
6. If an acknowledgement is received, press the
OK button.
7. Press and hold the PTT button and speak your
message.
8. Release the PTT button when you have
completed your message.
Receiving an individual (routine) call
With an incoming individual call displayed:
1. Select
Show info from the options to review
relevant call details.
2. Select Reply on Ch ## at any time to accept the
call.
If auto channel change is turned on then the
channel will automatically change after 10
seconds.
The radio is re-tuned to the specified channel.
3. To reject the call, select Reject .
62
Ray50 / Ray60 / Ray70