Raymarine RAY50, Инструкция по установке и эксплуатации

Страница: 64 / 116

7.7 Position requests
The radio can request position information from any
station capable of responding to the request.
Position requests can be sent to any contact stored
in the
Phonebook or by manually inputting the
station’s MMSI number.
When connected to a Raymarine ® multifunction
display the position data from the request can also
be display in the Chart application.
Making a position request
You can request the position of another station.
From the Position Request menu: Menu > DSC
Calls > Position Request .
1. Select Phonebook to request the position of a
contact saved in your Phonebook, or
2. Select Recent Calls to request the position of a
contact that you have called recently, or
3. Select Enter MMSI to manually enter the MMSI
number of the station that you want to request
the position of.
4. Select a contact or enter an MMSI manually and
press the OK button.
The position request is sent. When a response is
received the position of the contact is displayed.
Responding to a position request
With a Position request displayed:
1. Select
Send position to respond with your
current location, or
2. Select Cancel to ignore the request.
3. If the position reply is set to manual then select
SEND to send the position report.
4. Select OK to resume normal operation.
If the Position requests setting, found in the
GPS set-up menu is set to Auto accept then the
response is sent automatically.
Setting automatic response to position
requests
You can configure your radio to respond to incoming
position requests automatically.
From the DSC set-up menu: Menu > Set-up > DSC
set-up
1. Select Position requests to switch between
Manual accept (default) and Auto accept.
7.8 Phonebook
The phonebook can be used to save up to 100
contacts.
You can add, edit and delete contacts stored in the
phonebook.
Adding a phonebook entry
You can save contacts in the phonebook by entering
their MMSI and assigning a name to the contact.
From the DSC Calls menu: Menu > DSC Calls .
1. Select Phonebook .
2. Select Add new .
3. Select the type of contact.
• Vessel
• Group
• Coast station
4. Use the Rotary knob to cycle through the
available numbers and press OK to confirm and
move to the next digit.
5. Press the OK button to confirm the MMSI.
6. Use the Rotary knob to cycle through the
available characters and press OK to confirm
and move to the next character.
The maximum length for contact names is 10
characters.
7. If the Contact name is less than 10 characters,
press and hold the OK button and select Save .
8. Press the Back button at any time to edit
characters you have already entered.
9. Press and hold the OK button and select Move
cursor to edit an existing character.
10. When complete press the OK button to return to
the Phonebook.
Editing a phonebook entry
From the DSC Calls menu: Menu > DSC Calls .
1. Select Phonebook .
2. Select the contact you want to edit.
3. Select
Edit name or Edit MMSI
The contact’s MMSI or name is displayed.
4. Use the Rotary knob to change a character.
5. Press the OK button to confirm each character
and move to the next.
6. When you have completed your changes press
the OK button again to save the changes.
Deleting a phonebook entry
From the DSC Calls menu: Menu > DSC Calls .
1. Select Phonebook .
2. Select the contact you want to edit.
3. Select
Delete .
4. Select Yes .
The contact is deleted.
64
Ray50 / Ray60 / Ray70