Raymarine RAY50, Инструкция по установке и эксплуатации

Страница: 44 / 116

6.1 Controls and interface
The controls and interface available are as follows:
Base station
D13220-1
5 6 7 8
1
3
2
4
1. Built-in speaker
2. Rotary knob / OK push button — Press knob
in to access menu / DSC functions and to
confirm selections. Turn rotary clockwise or
anti-clockwise to move up and down through
menu items or to change channel from the
Homescreen.
3. LCD
4. VOL/SQ — Turn knob to adjust volume or
squelch up and down. Press center button to
switch between volume and squelch control.
5. DISTRESS — Push up the spring loaded cover
and press this button to make a DSC distress
call.
6. 16 / PLUS — When powered on press to switch
between priority channels.
7. Power — Press to power the unit on. Press
and hold for 3 seconds to power the unit off.
Momentary press to access the shortcut list.
8. Back — Move back through menu options.
Fistmic
D13221-1
2
1
6
4
3
5
1. PTT (Push to Talk) — Press and hold to send
a voice message. Release to return to receive
mode.
Note: The maximum transmit time is limited
to 5 minutes to prevent un-intentional
transmissions from occupying the VHF
channel.
2. Speaker
3. Microphone location
4. Channel Up and Down — Changes the channel
up or down.
5. HI/LO — Press to switch between High (25 W)
and low (1 W) transmit power.
6. 16 / PLUS — When powered on press to switch
between priority channels.
6.2 Powering the unit on
With the radio connected to a power supply the
power button is used to switch the radio on and off.
1. Press the
Power button to power-up the radio.
The startup is displayed.
Ray60
Software V1.00
MMSI: 123456789
O K
The startup screen will automatically time-out
after 5 seconds.
2. Press the OK button, or wait for the startup
screen to time-out.
The Homescreen is displayed.
44
Ray50 / Ray60 / Ray70