Raymarine Ray260 Скачать руководство пользователя страница 66

Страница: 66 / 94

10.1 Maintenance

The Ray260 has no user serviceable parts or adjustments.
Never remove the cover or attempt to service the product, doing
so may invalidate your product warranty.

To following preventive measures should be followed:

• Although the product is waterproof, keep the unit as dry as

possible.

• If you remove a handset connection ensure the dust cap is

fitted to the connector.

10.2 Routine checks

The following periodic checks should be made:

• Examine cables for signs of damage, such as chafing, cuts or

nicks.

• Check that the cable connectors are firmly attached and that

their locking mechanisms are properly engaged.

Note:

Cable checks should be carried out with the power

supply switched off.

Ray260

Содержание Ray260































































































Результаты поиска

Содержание Ray260

Отзывы:

Похожие инструкции для Ray260

Бренды по названию

Популярные бренды

Raymarine Ray260, Руководство пользователя

Результаты поиска

Содержание Ray260

Отзывы:

Похожие инструкции для Ray260

Бренды по названию

Популярные бренды