Raymarine Ray260 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 94

background image

8.7 Automatic Transmitter
Identification System (ATIS) and
Marcom-C mode

ATIS is a European system used on some inland waterways.

VHF radios operating in an ATIS region must be programmed
with a unique ATIS number; this can be obtained from the
relevant licensing authority. The ATIS number is attached as a
digital signal at the end of each transmission and identifies you
to the relevant authorities who monitor the system.

When operating in ATIS mode, some of the products features
are not available:

• Use of DSC is not permitted in ATIS regions. You will be

unable to make DSC distress and other types of digital
selective call.

• Dual / Tri Watch operation is not permitted in ATIS regions.

You will be unable to use these features.

• Channel scanning is not permitted in ATIS regions. You will be

unable to use the scan features.

• ATIS regulations restrict the transmit power to 1 watt for the

following channels: 6, 8, 10, 11, 12, 13, 14, 71, 72, 74 and 77.
You will be unable to change the power on affected channels.

You can enable or disable ATIS using the menus (except on
Marcom-C configured units).

Marcom-C mode

Marcom-C mode is a restricted Ray260 configuration for VHF
operators with a Marcom-C license. This is applicable to radios
operated exclusively in European inland waterways using the
ATIS system.

A Marcom-C VHF radio has the ATIS permanently enabled. You
will not be able to disable ATIS operation. Marcom-C operation is
set by the dealer at point of sale. If you wish to enable or disable
Marcom-C mode, you must contact your Raymarine dealer.

For further information please contact Raymarine technical
support.

Enabling / Disabling the ATIS function

With the ATIS ID programmed you can now enable or disable
the ATIS function as required by following the steps below.

Note:

If your radio has been configured to use Marcom-C

mode then ATIS will be permanently enabled and you will not
be able to disable ATIS operation. Marcom-C mode is set by
the dealer at point of sale. If you wish to enable or disable
Marcom-C, please contact your Raymarine dealer.

HI

- ATI S FUNCTI ON- -
ON
OFF

[

BACK

]

O

K

HI

- ATI S FUNCTI ON- -
ON
OFF

[

BACK

]

O

K

HI

- ATI S  FUNCTI ON- -
ATI S  ON
THEN  DSC  OFF
PRESS

[

OK

]

O

K

B

ACK

HI

- ATI S  FUNCTI ON- -
ATI S  OFF
THEN  DSC  ON
PRESS

[

OK

]

O

K

B

ACK

O

K

HI

- ATI S  OPERATI ON-
MY  ATI S  I D
ATI S  FUNCTI ON

[

BACK

]

D

12623-1

From the ATIS operation menu:

1. Select

ATIS Function

.

2. Select

ON

to enable the ATIS function, or

The message

ATIS ON THEN DSC OFF

is displayed

on-screen to warn that when ATIS is enabled then DSC
functions are not available.

3. Select

OFF

to disable the ATIS function.

The message

ATIS OFF THEN DSC ON

is displayed

on-screen to warn that when ATIS is disabled then DSC
functions are available again.

If no ATIS ID has been programmed then the message

PLEASE

INPUT ATIS ID FIRST

is displayed.

Note:

With the ATIS function enabled the following functions

will be disabled:

• DSC functions.

• Scan functions.

• Multiple watch functions.

VHF operations

57

«
...
55
56
57
58
59
...
»

Содержание Ray260































































































Отзывы:

Нет отзывов

Похожие инструкции для Ray260

Бренд: Handic Страницы: 59

Бренд: Saab Страницы: 4

Бренд: Tactic Страницы: 16

Бренд: i-box Страницы: 18

Бренд: Sangean Страницы: 1

Бренд: Sirius XM RAdio Страницы: 26

Бренд: Raymarine Страницы: 76

Бренд: Trio Страницы: 76

GMR 620 xHD2 Series

Бренд: Garmin Страницы: 8

Бренд: B&G Страницы: 20

Бренд: LST Страницы: 3

Бренд: Albrecht Audio Страницы: 48

Бренд: Furuno Страницы: 99

Бренд: Cobra Страницы: 11

Бренд: NXP Semiconductors Страницы: 2

Бренд: Galaxy Страницы: 35

Бренд: BC Страницы: 19

Бренд: La Crosse Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды