Raymarine Dragonfly 6 Скачать руководство пользователя страница 34

Страница: 34 / 116

5.1 General cabling guidance

Cable types and length

It is important to use cables of the appropriate type

and length
• Unless otherwise stated use only standard cables

of the correct type, supplied by Raymarine.

• Ensure that any non-Raymarine cables are of the

correct quality and gauge. For example, longer

power cable runs may require larger wire gauges

to minimize voltage drop along the run.

Routing cables

Cables must be routed correctly, to maximize

performance and prolong cable life.
• Do NOT bend cables excessively. Wherever

possible, ensure a minimum bend diameter of 200

mm (8 in) / minimum bend radius of 100 mm (4 in).

• Protect all cables from physical damage and

exposure to heat. Use trunking or conduit where

possible. Do NOT run cables through bilges or

doorways, or close to moving or hot objects.

• Secure cables in place using tie-wraps or lacing

twine. Coil any extra cable and tie it out of the way.

• Where a cable passes through an exposed

bulkhead or deckhead, use a suitable watertight

feed-through.

• Do NOT run cables near to engines or luorescent

lights.

Always route data cables as far away as possible

from:
• other equipment and cables,
• high current carrying AC and DC power lines,
• antennae.

Strain relief

Ensure adequate strain relief is provided. Protect

connectors from strain and ensure they will not pull

out under extreme sea conditions.

Cable shielding

Ensure that the cable is properly shielded that the

cable shielding is intact (e.g. hasn’t been scraped off

by being squeezed through a tight area).

5.2 Connections overview

Depending on date of manufacture

Dragonly 6

Dragonly 7

products and

CPT-60

CPT-70

and

CPT-80

transducers are available with 1 connector

keyway guide (Legacy) or 3 connector keyway

guides (Updated). Adaptor cables can be used

to connect 1 keyway connectors to 3 keyway

connectors.

Rear connector / Locking collar

Connector

Description

Unit /

Display

Compatible

transducer

Red – 1

keyway

• Legacy

Dragonly

• Legacy

Dragonly

• Legacy

CPT-60

• Legacy

CPT-70

• Legacy

CPT-80

Green – 3

keyway

• Updated

Dragonly

• Updated

Dragonly

• Updated

CPT-60

• Updated

CPT-70

• Updated

CPT-80

•

CPT-DVS

Transducer cable connectors

Cable

Connector

Description Transducer

Compatible

unit / display

Black – 1

keyway

• Legacy

CPT-60

• Legacy

CPT-70

• Legacy

CPT-80

• Legacy

Dragonly

• Legacy

Dragonly

Green – 3

keyway

• Updated

CPT-60

• Updated

CPT-70

• Updated

CPT-80

•

CPT-DVS

• Updated

Dragonly

• Updated

Dragonly

Adaptor cables

Adaptor cables are available to enable connection of

the older 1 keyway connectors to the new 3 keyway

connectors.

Dragonly 6 / Dragonly 7

Содержание Dragonfly 6





















































































































Результаты поиска

Содержание Dragonfly 6

Отзывы:

Похожие инструкции для Dragonfly 6

Бренды по названию

Популярные бренды

Raymarine Dragonfly 6, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Dragonfly 6

Отзывы:

Похожие инструкции для Dragonfly 6

Бренды по названию

Популярные бренды