43
RealVision™ 3D
SideVision™
DownVision™
High CHIRP / High
Frequency
Medium CHIRP /
Medium Frequency
Low CHIRP / Low
Frequency
Selecting a Sonar channel
The first time you open a new Sonar app page you will be requested
to select a channel, subsequently you can change the sonar channel
by selecting a channel icon from the Sonar app menu.
1. Select a relevant channel icon from the Menu.
2. Alternatively select
All channels
from the Menu and then choose
your desired sonar module and channel.
Placing a Waypoint in the Sonar app
When you observe something of interest in the Sonar app you can
place a waypoint at its location so that you can find the area again.
1. Select and hold on the point of interest onscreen.
The Context menu is displayed and scrolling is paused, temporarily.
2. Select
Add Waypoint
from the context menu.
The Sonar image will remain paused for approximately 10 seconds
after the Waypoint has been placed.
Note:
To place a waypoint in a RealVision™ 3D channel, use the
onscreen Waypoint/MOB icon or the app menu:
Menu > Add
waypoint
to place a waypoint at your vessel’s current location..