13
Configuring Transducer settings
For systems set up with Sonar, you should configure your transducer
settings.
1. Select
Transducer
from the Sonar app’s
Settings
menu:
Menu
> Settings > Transducer
2. Select how you want your depth to appear:
i.
Below transducer (default) — No offset required
ii. Below keel — Enter the distance between the transducer face
and the bottom of the Keel.
iii. Below waterline —Enter the distance between the bottom of
your Keel and the waterline.
3. If your transducer includes a temperature sensor then you can also
configure temperature settings as follows:
i.
Enable or disable temperature readings as required.
ii. If enabled, check the temperature reading against the actual
water temperature.
iii. If the current reading requires adjustment, select
Calibrate
temp
and enter the difference between your 2 readings.
