12
Networked MFDs will automatically be updated to use the Data
sources selected on your Data master MFD.
Data source types
Settings tab
Description
Depth
Enables you to choose a source of data for
Depth readings.
Speed through
water
Enables you to choose a source of data for
Speed readings.
Heading
Enables you to choose a source of data for
Heading data.
GPS
Enables you to choose a source of data for
GPS data.
GPS Datum
In order for your GNSS receiver and MFD to
correlate accurately with your paper charts,
they must be using the same datum. This
option enables you to choose a source for this
datum.
Wind
Enables you to choose a source of data for
Wind readings.
Time and Date
Enables you to select the device you want to
use for the time and date information used by
your MFD.
Identifying engines
Engine data can be displayed on your MFD if your engines are
transmitting the relevant supported data on to the MFD network. If
your system has mislabelled your engines then you can correct this
using the Engine identification wizard.
The Engine identification wizard can be accessed from the Boat details
tab:
Homescreen > Settings > Boat details > Identify engines
.
1. Ensure the correct number of engines is selected in the
Num of
Engines:
box.
2. Select
Identify engines
.
3. Follow the onscreen prompts to complete the engine identification
wizard.
