4.1 Connections overview
Axiom™+ rear view
Axiom™+ connectors
1.
Network connection — Connects to RayNet network or device. Refer to
for available cables.
2. Accessory connection — Connects to Remote Card Reader (RCR) accessory.
3.
Power / NMEA 2000 connection — Connects to 12 V DC power supply / NMEA 2000 or
SeaTalkng ® backbone.
4.
Optional grounding point — Connects to Vessel RF ground, or negative battery terminal. Refer to
p.44 — Grounding — optional dedicated drain wire
section for details.
5. Transducer connection — Connects directly to RealVision™ 3D transducers or other transducers
via adaptor cables.
Note:
Chartplotter only variant Axiom™+ MFDs require a networked sonar module to enable
sonar features.
Connecting cables
Follow the steps below to connect the cable(s) to your product.
1. Ensure that the vessel's power supply is switched off.
38
