background image

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1.  To clean the LCD monitor screen: 

• 

Turn off the LCD monitor and unplug the power cord.

• 

Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2.  Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage 

it. 

3.  Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display. 

4.  Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of 

any nature. 

5.  Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside 

this range may result in permanent damage.

6.  Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• 

Monitor-to-PC signal cable is frayed or damaged. 

• 

Liquid spills onto the LCD monitor or the monitor is exposed to rain. 

• 

The LCD monitor or case is damaged. 

Attaching the monitor to the base

1.  Remove the monitor from the packaging.

2.  Attach the footstand to the base. (for selected models).

3.  Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4.  Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1.  Turn off your computer and unplug your computer's power cord.

2.  Connect the signal cable to the DP (optional) and/or VGA (optional) 

and/or HDMI (optional) input socket of the monitor, and the VGA 

(optional) and/or DP (optional) and/or HDMI (optional) output socket 

of the graphics card on the computer. Then tighten the thumbscrews 

on the signal cable connector.

3.  Optional: Connect the audio input socket (AUDIO IN) of the LCD 

monitor and the line-out port on the computer with the audio cable.

4.  Insert the monitor power cable into the power port at the back of the 

monitor.

5.  Plug the power cords of your computer and your monitor into a 

nearby electrical outlet. 

Note: Audio output is only for audio output model. Please check user   

manual for more instruction.

 

AMD FreeSync(DP/HDMI):

It can allow a AMD FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content 

frame rates for power efficient, virtually stutter free and low-latency display update.

1

2
3

4

5

External controls

1

Power button

Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power 

saving mode.

2

Function key

/

a.  Press to view Main page. Press again to enter hotkey1 function. 

b.  When the Function Menu is active, press this key to view the basic 

information for your monitor and current input or reset the custom color 

settings to the factory defaults.

Reviews: