1.
Trunnion mount
2. Flush mount (Mounting surface and MFD screen a level))
3.
Surface mount (MFD screen protrudes slightly form mounting surface)
4.
Front mount (using the Front Installation Kit accessory: 7”: A80498, 9”: A80500, 12”: A80502)
Legacy MFD adaptor plates are also available to enable you to easily swap out older MFDs for new
Axiom MFDs, please refer to
for a list of available adaptors.
3.3 Bracket (Trunnion) mounting
The bracket can be used to mount your MFD on a horizontal surface, the bracket can also be used to
mount the MFD in an above head installation.
Ensure you have chosen a suitable mounting location for your MFD, with sufficient head room to
allow the MFD’s angle to be adjusted or the MFD to be removed if necessary. If installing ‘above
head’ take extra care to ensure the knobs are tightened sufficiently to prevent them coming undone
due to vibration when underway.
31
