Raymarine AIS500, Руководство по установке

Страница: 8 / 48

General information
Intended Use
Raymarine AIS500 is an AIS Class B transceiver, and is intended
for world wide use aboard leisure marine boats and workboats not
covered by International Maritime Organization (IMO) and Safety of
Life at Sea (SOLAS) Carriage Regulations.
Caution: Cleaning
When cleaning this product do NOT use acid,
ammonia-based or abrasive products, and do NOT
use high pressure washing (jet wash) equipment.
Product disposal
Dispose of this product in accordance with the WEEE Directive.
The Waste Electrical and Electronic Equipment (WEEE)
Directive requires the recycling of waste electrical and electronic
equipment. Whilst the WEEE Directive does not apply to some
Raymarine products, we support its policy and ask you to be aware
of how to dispose of this product.
AIS disclaimer
All information presented by the Raymarine AIS transceiver is
advisory only, as there is a risk of incomplete and erroneous
information. By placing the AIS500 into service you acknowledge
this and assume complete responsibility for any risks associated
with this device, and accordingly release Raymarine and SRT
Marine Technology Ltd from any and all claims arising from the use
of the AIS service.
Warranty registration
To register your AIS500 transceiver ownership, please take a few
minutes to fill out the warranty registration card found in the box, or
visit
www.raymarine.com and register on-line.
It is important that you register your product to receive full warranty
benefits. Your unit package includes a bar code label indicating the
serial number of the unit. You should stick this label to the warranty
registration card.
Technical accuracy
To the best of our knowledge, the information in this document was
correct at the time it was produced. However, Raymarine cannot
accept liability for any inaccuracies or omissions it may contain. In
addition, our policy of continuous product improvement may change
specifications without notice. As a result, Raymarine cannot accept
liability for any differences between the product and this document.
AIS500 installation guide
Information scope
This document gives introductory, installation and troubleshooting
information for the Raymarine Automatic Identification System Type
500 Transceiver (AIS500) transceiver.
Refer to the ProAIS User Manual and the operating manual for
your Raymarine Multi-Function Display, for instructions on how to
configure and operate your AIS system.
All documents are available to download as PDFs from
www.raymarine.com
Static data requirement
The AIS500 transceiver needs to be correctly programmed with the
following vessel data (static data) before use:
8