Raymarine AIS500, Руководство по установке

Страница: 32 / 48

Green
White
Brown
Yellow
Receive
Receive
Transmit
Transmit
NMEA0183
4800 baud
Connect to
boat's VHF
D11646-1
Transceiver
2. Connect these wires to the appropriate points on the ships VHF.
Connecting to multi-function displays
Data is transferred between the AIS500 transceiver and the
associated Raymarine multi-function display(s) using either
NMEA0183 (at 38400 baud) or SeaTalk
ng .
Ensure power to the multi-function displays is switched off, then
connect the AIS500 transceiver by carrying out either the
Connect
using NMEA0183 OR the Connect using SeaTalk ng procedure.
Connect using NMEA0183 (high baud rate)
If your multi-function displays are NOT connected to a SeaTalk ng
system, connect the AIS500 transceiver 38400 baud, NMEA0183
bus to the boat’s 38400 baud, NMEA0183 system as follows:
1. Identify the 38400 baud, NMEA0183 wires from the AIS500
transceiver.
Orange & green
Orange & white
Orange & brown
Orange & yellow
Receive
Receive
Transmit
Transmit
NMEA0183
38400 baud
Connect to
MFD
D11647-1
2. Connect these wires to the appropriate points on the boat’s
38400 baud, NMEA0183 system.
Connect using SeaTalk ng
Important: Do not connect to a Raymarine SeaTalkng system,
if this will cause the maximum permitted SeaTalkng Load
Equivalence Number (LEN) value for the system to be exceeded
(see
Site Requirements ).
If your multi-function displays are connected to a SeaTalk ng system,
connect the AIS500 transceiver SeaTalk ng connector to SeaTalk ng
as follows:
1. Identify the AIS500 transceiver SeaTalk ng connector.
32