Raymarine AIS500, Руководство по установке

Страница: 37 / 48

You can use the supplied ProAIS PC software, to check the vessel
data programmed into your AIS500. If this information is incorrect
please contact your Raymarine dealer before using the transceiver.
Areas outside of USA
In areas outside of the USA, use the supplied ProAIS PC software to
configure your AIS500 transceiver, as described in the instructions
provided in the
ProAIS User Guide .
5.3 Checking for interference
Post installation check
If you have installed any system aboard a boat or made other
changes to the boat’s electronic systems (radar, VHF radio etc.),
you need to check before casting off, that all electrical systems
operate satisfactorily without any undue electrical interference,
in order to conform with Electro Magnetic Compatibility (EMC)
regulations. To do this:
1. Ensuring it is safe to do so, turn on all electronic systems aboard
the boat.
2. Check that the electronic systems all operate satisfactorily.
Post installation procedures
37