Raymarine AIS500, Руководство по установке

Страница: 36 / 48

5.1 Switching on
When the installation is complete, observe the STATUS indicator
and:
1. Switch on power to the AIS500 transceiver.
2. Check that:
i. When power is first applied, the STATUS indicator flashes
RED twice, then after a few seconds shows AMBER.
ii. After a time (up to 2 minutes) the indicator changes to green.
This indicates the AIS500 transceiver is operating normally.
5.2 Configuration
Warning: Configure before use
This Raymarine product must be correctly configured,
to ensure optimum performance and minimize the
chances of unsafe or other erroneous data.
Configuration requirement
After installation and successful switch on, the AIS500 transceiver
must be configured for optimum performance aboard the vessel.
The person configuring the AIS500 needs to know the following
vessel information:
• MMSI number
• Name
• Call sign
• Dimensions
• Type
• GPS antenna position
The manner in which configuration is carried out depends on the
legal requirements of the geographical area you are.
Important: Before starting any AIS configuration procedure,
SWITCH OFF all associated multi-function displays (MFDs),
otherwise you will not be able to correctly configure your AIS500
transceiver.
USA
In the USA, it is a legal requirement that the configuration is
performed by a suitable dealer.
36