Raymarine 37STV Gen2, Дополнительные инструкции по установке и эксплуатации

Страница: 19 / 20

2.5 Quad RF STV systems
Connecting a basic system
connects to
Television Monitor
(not supplied)
IRD (not supplied)
ANT RF1
FUSE NMEA PC INTERF ACE
RECEIVER
-
+
-
+
MADE IN KOREA
RF 2 RF 1
RF 4 RF 3
RF cable
Antenna base plate
ACU
DC 9 to30V
12 V or 24 V dc
power supply
D1
1
546-2
Brown with
red sleeve
Blue with
blue sleeve
Green/yellow with
white sleeve
Ground
Drain (screen)
1. Connect an RF cable from the ANT RF1 connector on the ACU
to the RF1 connector on the antenna base plate.
2. Connect an RF cable from the RECEIVER connector on the
ACU to either the LNB , ANT , or Satellite In connector on the
rear of the IRD.
3. Connect a 12 V or a 24 V dc supply to the DC 9 to 30V connector
on the rear of the ACU.
4. Refer to the relevant Manufacturer’s handbook for details on
configuring your IRD.
System with 2 IRDs
to TV monitor (not supplied)
to TV monitor (not supplied)
IRD1 (not supplied)
ANT RF1
FUSE DC 9 to 30V NMEA PC INTERF ACE
RECEIVER
- +
- +
MADE IN KOREA
RF 2 RF 1
RF 4 RF 3
IRD2 (not supplied)
RF cable
Antenna base plate
ACU
Power in
D1
1
547-2
Installation 19