RAYLASE IPG, Руководство по оборудованию

Страница: 7 / 13

Technical Data Chapter 2
MN027 / v1.1.0 RAYLASE IPG Interface Board 7
2 TECHNICAL DATA
2.1 Dimension and Weight
Dimensions: W 85mm, L 103mm, H 30mm
Weight: 400g
2.2 Environmental Conditions
Ambient temperature: +15°C to +35°C
Storage temperature: 0°C to +80°C
Humidity rel.:

80% non-condensing
2.3 SET-UP Procedure
Make sure that all requirements for laser safety, as described in the scan head manuals, are
fulfilled. It is the user
’s responsibility to follow the regulations on laser safety.
Control card IPG laser
IPG interface
board
Adap-
ter
J3
J2
J4
Power
supply
J1 J5
Shutter
Installation

Connect power supply for laser to J1.

Connect laser power supply output J2 to IPG laser.

Connect IPG interface board output J4 to laser interface.

Connect RAYLASE control card via adapter to IPG interface board input J3.

Switch on laser power supply. After a short delay, the laser will be switched on.
Please note:
J5 must be connected to switch on the laser.
Fig. 1
Block diagram