RAYLASE IPG, Руководство по оборудованию

Страница: 10 / 13

Chapter 2 Technical Data
10 RAYLASE IPG Interface Board MN027 / v1.1.0
2.4.2 Laser Power Input and Laser Power Output
J1, J2 PIN Signal
1 2 3
Laser power
interconnection
1 24V
2 Return
3 Safety Ground
2.4.3 Cable Specifications
Connection Cross-section Length Signals
24V power supply
− J1
min. 3x2,5mm² --- ---
J2
− IPG laser
min. 3x2,5mm² max. 2m ---
J4
− IPG laser
--- max. 2m 1:1
2.4.4 Status LEDs
LED Meaning
1 2 3 4
green - - -
5V Input Voltage from control card is ready
- green - -
24V Input Voltage for laser is ready
- - red -
24V Output
Soft start process of IPG laser is active.
- - green -
IPG laser is powered up
- - - red
Laser emission ON Laser is active
LED Meaning
5 6 7
green green green Normal state
yellow green green Laser not ready (only interface type D)
yellow * - - Shutter open (combinations with other fault possible)
- - red Laser temperature out of range
- red -
Powersupply out of range (only interface type D)
red - -
Back Reflection error
red* red* red*
Internal system error
* flashing