6. Let the motor plate glide into the position enforced by the tensioning device.
7. Tighten the two screws fixing the motor plate.
8. Replace the small metal plate mounted on the motor.
9. Replace the service panel at the left side of the machine.
6.1.5 Exchange of x-motor
1. Open the cover of the machine.
2. Remove service panel on the left side of the machine.
3. Unplug the motor.
4. Remove the small metal plate, which is mounted on the motor.
5. Remove the screws fixing the motor to release the belt.
6. Remove the motorplate from the motor.
7. Fix the motorplate on the new motor.
8. Replace the motor into the machine, don’t fix the screws yet.
9. Replace the x-axis belt.
10. Tension the belt as described before (Special instructions for X-belt tensioning).
11. Replace the small metal plate mounted on the motor.
12. Replace the service panel at the left side of the machine.
6.1.6 Exchange of x-axis
1. Open the cover of the machine.
2. Remove service and maintenance panel on left and right side of the machine.
3. Open the cover of the x-axis.
4. Remove mirror #2 ande the working head containing mirror #3 and the lens.
5. Close the cover of the x-axis.
6. Unplug the motor cable at the left side.
7. Remove the plate fixing the x-axis on the y-axis belt on the left side.
8. Remove the screws fixing the x-axis on the y-axis on the right side.
9. Put the x-axis in the fore position where you examine a bigger hole in the sidewalls.
10. Remove the x-axis through pulling it out into the left.
11. Place the new x-axis in the machine in the reverse order.
12. If not already on, please mount the small metal plate at the motor on the new axis.
13. Don’t forget to replace the optics and covers.
6.1.7 Exchange of y-motor
