Service Manual Rayjet
General
Safety information
07/09/2010
Trotec Produktions- und Vertriebs GmbH
_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support
7 / 53
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto:
www.rayjetlaser.com
responsibility to ensure the safe removal and disposal of the smokes and particles from
the laser machine according to the national and regional threshold values.
In the US reference should be made to Section 7.3 in the ANSI Z136.1-1993 Standard
for the safe use of lasers, to the exposure criteria in CFR 1910 Subpart Z from the US
government, and to the Threshold Limit Values (TLVs) published by the American
Conference of Governmental Industrial Hygienists (ACGIH).
7.
Please refer to the manual of your exhaust system regarding the change intervals of the
filters. We recommend to make a note of the last change of filters on an adhesive label.
8. PVC
(Polyvinylchloride)
MUST NOT
be processed with the laser engraver.
If you have any questions please contact your supplier or Trotec.