RaycoWylie i4500, Инструкция по эксплуатации

Страница: 86 / 91

55M4500EBE00A-A
86
i4500 Lattice Boom Crane
Instruction Manual
Preventive Maintenance
• Your i4500 system has been designed to operate over long periods of time with
minimum maintenance. However, continuous satisfactory operation depends
upon system’s care and cleaning.
• To clean the surface of the display, use mild soap (or mild window cleaners)
and a clean soft cloth.
• Replace all cables showing cut or damage. Make sure the connector contacts
are not too corroded.
• Replace ATB switch if the plunger shows excessive corrosion.
6.4 Maintenance
Replacement parts and original parts must be
obtained from RaycoWylie unless approved
and authorized as an equivalent by a
RaycoWylie technician.
To keep the i4500’s display waterproof, make sure the back cover is
tightened following an X pattern.
Your i4500 system requires no additional lubrication.
Important: If condensation appears in the screen of the
display unit, open the cover in a dry place and let it air
dry for a day.
Important: Do not use pressure steam on the i4500 display
box, junction boxes, angle sensors, load cells or on any
connectors. This could result in moisture in the connectors
and can cause eventual sensor failure.