RaycoWylie i4500, Инструкция по эксплуатации

Страница: 32 / 91

55M4500EBE00A-A
32
i4500 Lattice Boom Crane
Instruction Manual
3. Proper functioning of the equipment depends upon proper daily
inspection and conformity to the operating instructions described in
this manual.
4. During normal operation, the rated capacity of a crane should not
be exceeded. The overload indication should not be used as a normal
operating feature.
5. The crane should always be operated smoothly and at a safe speed.
6. In order to have a proper rated capacity and radius, the system must be
properly configured. Failure to properly configure the system can result in
machine breakage or tipping which could lead to serious injury or death.
7. The operator must verify the crane configurations and number of parts of
line for each available hoist every time he/she enters the crane and every
time the crane is rigged.
Note : Each hoist has its own configuration set-up kept in memory and the
configuration and number of parts of line will change simply by changing
the hoist from main to auxiliary.
4.2 Residual Risks
In spite of the application of all relevant safety regulations and the imple-
mentation of safety devices, certain residual risks cannot be avoided:
• Risks caused by no indication of malfunction of the output relays avoiding
lockout to operate in overload conditions, causing machine breakage or tipping
that could result in injury or death.
Improper configuration of the i4500 system may also cause a
‘‘Zero Capacity’’ if no chart is found to match the configuration set
by the operator.
4.1 Safety Instructions (Cont’d)