RaycoWylie i4500, Инструкция по эксплуатации

Страница: 42 / 91

55M4500EBE00A-A
42
i4500 Lattice Boom Crane
Instruction Manual
4.4.3 Working with Jib, One Hoist (Cont’d)
or
or
13. Use the Up or Down button to select the desired
value.
14. Press the Select button to accept this new value in
the system or press the Escape button to go back
to the main screen.
15.Use the Up or Down button to select the outriggers
position from the list.
or
This menu will not appear
and the system will go on
to the next menu if there
is only one choice on this
list.
16. Press the Select button to accept this new value
in the system or press the Escape button to go
back to the main screen.
or
Once the selection of the configuration is over, the system automatically goes back
to the main screen (normal operating mode). You can use the Info button to see at
a glance the configuration of the crane.
You may have to answer extra
questions according to your
crane and its load chart, or
for example if you have a counter-
weight that you need to configure.
Keep answering the questions until you
see the main screen.
Figure 2b