RaycoWylie i4500, Инструкция по эксплуатации

Страница: 65 / 91

65 i4500 Lattice Boom Crane Instruction Manual
55M4500EBE00A-A
4.6.2 Height Limit
1. Repeat steps 1 to 3 in the accessing
range limiting mode section (see
section 4.6.1 on p. 64).
2. The line «Height limit» is
highlighted by default. If it is not
the case, use the Up or Down
buttons to highlight it.
3. Press the Select button to confirm
your choice.
4. Boom up to the desired boom tip height limit.
5. Press Select button to confirm the maximum height of the boom tip. As you
release Select button, a 10-second countdown will allow you to boom down
before your programmed height limit becomes active.
The height limit is a limit on the
maximum height of the tip of the boom
or jib. We can also say that it is a height
limit with a 360° degrees fixed height .
Height limit
programmed
Height limit
reached