RaycoWylie i4500, Инструкция по эксплуатации

Страница: 28 / 91

55M4500EBE00A-A
28
i4500 Lattice Boom Crane
Instruction Manual
The Two-Block condition indicator appears on the
i4500 display when such a condition is detected by the
system. This may block the hoist function, the booming
down and the boom extention depending on crane
model and/or on the options fitted on the machine.
The rope limit indicator appears on the i4500 screen to
indicate that the maximum load is limited by the rated
strength and the number of parts of line of the hoist
rope. Increase the number of parts of line between the
sheave on the boom tip and the block and change the
number of parts of line on the i4500 system to make
this indicator disappear and to reduce a rope limit.
One of these indicators (or many of them)
appear in the top-left corner of the i4500
screen when at least one operational limit is
active on the system. This is not a warning!
It is just there to remind you that an angle,
radius or height limit has been set in the limits
setting mode.
ANGLE RADIUS
HEIGHT
If you are approaching a predetermined maximum or
minimum angle limit, one these indicators will appear
on the screen, the yellow approach warning light will
blink and the internal buzzer will sound on and off.
ANGLE
MIN.
ANGLE
MAX.
If you have reached a predetermined maximum or
minimum angle limit, one these indicators will appear
on the screen, the red overload warning red light will
be activated and the buzzer will sound continuously.
ANGLE
MIN.
ANGLE
MAX.